Ducati
Tools
Due to our extensive product range, we do not hold all items in stock in Australia. For ex Europe items, an approximate delivery time frame will be advised. All prices are in Australian Dollars and include local taxes (GST). Shipping costs are additional.
Click on images to enlarge.
|
Ducati 1098 55mm Axle wrench |
$ 109.99 AU (incl. GST) |
|
THIS IS THE ONLY AXLE SOCKET TOOL THAT WILL ACTUALY FIT YOUR NEW DUCATI 1098 AXLE NUT! Contrary to what you may have been told a standard socket will not fit properly on your 1098 Axle nut. This is because the large axle nuts on the 1098, have a special inner taper. SpeedyMoto has made this tool just for the 1098, designed to fit perfectly and not ruin your axle nuts. A locator built into the socket keeps the tool from slipping off the nut when tightening. Used by the Carbonize 1098 Race Team!! Delivery time: 3-5 Days | |||
|
Ducati 4 Valve Cam belt Tool |
$ 43.99 AU (incl. GST) |
|
This tool holds the loaded cam from rotating while changing the belts on 4 valve Ducati engines.Simply slide the tool between the cam belt pulleys and slide the old bet off.Black Anodized finish provides years of protection. Works on 18 tooth sprockets, will not fit st4 engines. Delivery time: 3-5 Days | |||
|
Ducati Axle Wrench |
$ 109.99 AU (incl. GST) |
|
Speedymoto now offers a double sided axle wrench for all Ducati’s with single sided swing arms. The axle wrench tool has both a (hard to find) 41mm and a 46mm socket, fitting both sides of the rear axle.Unique design keeps the tool from slipping off the axle nut when tightening. A more effective and less expensive alternative to multiple sockets. Delivery time: 10-14 Days | |||
|
Ducati Cam Pulley Removal Tool |
$ 120.99 AU (incl. GST) |
|
This tool is functionally equivalent to Ducati tool #887005644 You get two tools.The first is needed to properly engage the cam nut, while the second holds the 18 tooth pulley. Wanting to upgrade to adjustable pulleys, install new cams, or time your bike to where it should be?All you need is this tool kit to remove your cam pulleys, and combine this with our engine turner (see other auction) and unleash more horsepower from you bike.Works on 2v and 4v engines that have 18 tooth cam pulleys Cam holder protected with a black anodized finish, while the socket has a black oxide finish. Delivery time: 3-5 Days | |||
|
Ducati Engine Turner |
$ 54.99 AU (incl. GST) |
|
Corsair Industries engine turner is functionally equivalent to Ducati tool #887130123.This tool allows you to easily and safely rotate your engine.Used when you check your valve clearances or setting the timing. finished with a Black Oxide coating, providing years of protection.Designed to be easily rotated with a 16 mm wrench or socket. You do not have to mess with handle position as you rotate the engine, as you would with the factory T-handle. Throw a ratchet on the end and the handle is always where you need it. Works on all modern 2 valve and 4 valve engines, including Pantah and Darmah. Delivery time: 3-5 Days | |||
|
Frame Suport Service Tool |
$ 164.99 AU (incl. GST) |
|
This innovative tool supports the frame and rear suspension when the engine is removed from the motorcycle, allowing you to easily move or transport the bike without stands. Our frame support tool is a must-have for any full-service shop or Ducati dealership. Works on all Ducati SuperSports, Monsters, ST's, and ST4's and any Ducati that uses the engine as a swingarm pivot. Delivery time: 10-14 Days | |||